Heading2 - 3.3 installing tcp/ip in windows® 95/98, Step - step 2. select the ip address tab, Installing tcp/ip in windows® 95/98 -2 – ADS Technologies NetDSL 800 ADSL Modem version 5.2b1 User Manual

Page 16: Configuring tcp/ip in windows® 95/98 -2, Configuring tcp/ip in windows® 95/98 3-2, 3 installing tcp/ip in windows, 4 configuring tcp/ip in windows

Advertising
background image

Installing TCP/IP in Windows® 95/98

3-2

NetDSL Software User’s Guide

A. If you see TCP/IP listed under Network Components, you already

have TCP/IP on your Windows

®

95/98. Proceed to configuration

directions for Windows

®

95/98 in Section 3.4.

B. If you do not see TCP/IP listed under Network Components, you do

not have TCP/IP on your Windows

®

95/98. Proceed to the next

section, “Installing TCP/IP in Windows

®

95/98.”

3.3 Installing TCP/IP in

Windows

®

95/98

Step 1. From the Configuration tab in the Network window, click Add.

Step 2. Select Protocol for the type of network component, and click Add.

Step 3. Choose Microsoft for Manufacturers list box and TCP/IP for Network

Protocols list box, then click OK.

Step 4. Check to see TCP/IP is listed under Network Components.

A. If you do not see TCP/IP listed under Network Components, you

have not installed TCP/IP. Repeat Steps 1 - 4.

B. If you see TCP/IP listed under Network Components, you already

have TCP/IP on your Windows

®

95/98. Proceed to configuration

directions for Windows

®

95/98 in Section 3.4.

3.4 Configuring TCP/IP

in Windows

®

95/98

Step 1. From the Configuration tab, select TCP/IP (for Ethernet adapters) listed

under Network Components and then click Properties.

Step 2. Select the IP Address tab.

You now have the option of using either dynamic or static IP addressing.

To enable dynamic IP addressing
Step 1. Click Obtain an IP Address automatically.
Step 2. OPTIONAL* Click the DNS Configuration tab and select Disable

DNS. If you previously entered any parameters, clear all pre-existing
settings.

Step 3. Select the Gateway tab and then click Remove to clear all pre-existing

settings.

Step 4. Click OK to exit TCP/IP Properties window and click OK to exit

Network window. When prompted, restart Windows

®

95/98. If you are

not prompted to restart Windows

®

95/98, do so manually. Proceed to

Chapter 4, “

NetDSL Manager

.”

* If specifically required by your ISP, you may need to enter DNS

information.

Advertising