AMCC 3WARE 720-0138-00 - Manual (Page 109)

Maintenance page
www.3ware.com 101
# Drives. Number of drives in the unit.
Type of Unit. Type of unit: RAID 0, RAID 1, RAID 5, RAID 10, Single Disk,
or Spare. If the unit has been given a unique name, it shows beneath the RAID
type.
Name of Unit. User-assigned unique name of the unit. The default setting is
blank.
Capacity. The usable capacity (size) of the unit.
Status. Operational status of the unit: Ok, Rebuilding, Initializing, Verifying,
Migrating, Degraded, or Inoperable (missing drives). When Rebuilding,
Initializing, Migrating, or Verifying, the percentage (%) complete is also
shown. The percentage complete can be active or paused. To see whether this
task is currently active or paused, click on the unit number to display the Unit
Details page, which has that information. For an explanation of the statuses,
see “Unit Statuses” on page 63.
Drive Information
Port. The port to which the drive is connected.
Model. The model of the drive.
Capacity. The capacity (size) of the drive.
Status . The status of the drive: OK, Not Supported, Not Present, and so forth.
If you need help regarding a status displayed here, please contact Technical
Support. For more information, see “Drive Statuses” on page 64.
Remove Drive. The Remove Drive link removes a drive from the controller
so that you can safely unplug it. In the Unit Maintenance section, this link is
only provided for drives that can be safely removed without creating an
inoperable unit. (For example, a RAID 5 missing 2 or more drives or a RAID
0 missing 1 or more drives would become inoperable.) If you remove a drive
from a redundant unit, the unit will become degraded. Once a unit has become
degraded, additional drives cannot be removed without making it inoperable,
so no
Remove Drive link will display.
Maintenance Task Buttons
Below the list of units, a row of task buttons lets you perform maintenance
and configuration tasks related to the unit. Before clicking one of these
buttons, select the appropriate unit.