AMCC 3WARE 720-0138-00 - Manual (Page 49)

Configuring a New Unit
www.3ware.com 41
5 On the right, specify a volume name and then click Partition .
Figure 18. Defining the Volume in the Macintosh Disk Utility
6 When a message asks you to confirm you want to partition the disk, click
Partition .
Figure 19. Confirmation Message to Create the Partition
You will see a series of messages appear toward the bottom of the Disk
Utility window as the RAID unit is first partitioned and then formatted.
This may take a couple of minutes, depending on the size of the drives in
your RAID unit.
a) Enter a
name
b) Click
Partition