Aiwa HT-DV1 - Manual (Page 13)

ENGLISH
13
PREP
ARA
TIONS
En
CONTINUE
Rear of the TV
To the S-video input connector
S-video cord (not supplied)
To the S-VIDEO connector
Rear of the DVD player
Connecting to a TV with an S-video input
connector
For the best possible picture clarity, it is recommended that
an S (separate) video cord (not supplied) be used when
connecting the DVD player to a TV equipped with an S-
video input connector.
Set the setup menu correctly after connecting
a TV
Set the "TV Aspect" of the setup menu according to the TV
connected to the system as follows (see "CHANGING
SETUP VALUES" on page 41 for details):
TV Aspect:
When the TV has a conventional 4:3 aspect ratio screen:
4:3 LETTER BOX or 4:3 PAN & SCAN
When the TV has a wide screen:
16:9 WIDE
NOTE
If picture noise appears while copy-protected DVDs are
played, connect the system directly to a TV. Do not connect
through a VCR, TV/VCR or AV selector.