Aiwa HT-DV1 - Manual (Page 17)

ENGLISH
17
BASIC OPERA
TIONS
En
When the menu screen is displayed
The menu screen may be displayed first after loading a
DVD or video CD which contains a menu.
Menu settings and the exact operating procedures for
using the menu differ depending on the disc. Follow
the instructions on each menu screen.
Use i / k / j / l or the number buttons to select the program
you want to view, then press ENTER or c to start playback.
Press TOP MENU/PBC or MENU to return to the menu
screen.
Use the number buttons and press ENTER to start playing
the program you want to view.
Press
v RETURN or MENU to return to the menu screen.
When PBC is turned off, you can play the disc
continuously without returning to the menu screen. To
turn off PBC, see "Playing a video CD without using
Playback Control (PBC)" on page 20.
To stop playback
Press s .
To turn the power off
Press POWER ( 6 STANDBY/ON).
The system enters power-off standby mode. "OFF" appears
on the display window.
If 20 minutes have elapsed without any operation
The system automatically enters power-off standby
mode.
Removing the disc
1 Press s to stop play.
If a DVD or video CD without PBC has been played, press
s once again.
2 Press z OPEN to open the disc cover.
3 Wait until the rotating disc is completely stopped.
4 Pull out the disc while pressing the center pivot.
Do not touch the surface of the disc.
5 Close the disc cover.
NOTE
Do not open the disc cover during playback.
CONTINUE
Adjusting the volume
Turn the VOLUME control on the amplifier or press
VOLUME
- / + on the remote control during playback. The
volume can be adjusted between 0 (minimum) and 40
(maximum).
During volume adjustment, the volume level is displayed
on the TV screen.
Example: When the volume level is 25
MASTER VOLUME
25
"25" is also displayed on the display window of the DVD
player.
The volume level setting is retained during power-off
standby. If the system is turned off with the volume level
set to 11 or more, it is automatically turned down to 10 the
next time the system is turned on.
To turn off the audio temporarily
Press MUTE on the amplifier or on the remote control.
The volume level becomes 0 and the MUTE indication and
the previous volume level are displayed on the TV screen.
MUTE
25
To restore the audio to the previous volume level, press
MUTE again.
For private listening
Connect an optional headphones set with a stereo mini
plug (3.5-mm diameter) to the PHONES jack on the
amplifier.
The speaker output is turned off.