Aiwa HT-DV1 - Manual (Page 23)

ENGLISH
23
BASIC OPERA
TIONS
En
4
Press i/k repeatedly to select the
desired setting.
The number buttons can also be used for entering numbers
(e.g. title number).
5
Press ENTER.
The new setting is confirmed.
Some menu items require further settings. In such a case
repeat steps 4 and 5.
To return to the previous menu screen
Press v RETURN or j .
To turn off the OSD menu
Press DISPLAY.
Tip
About the PLAY MODE button
The PLAY MODE button can also be used instead of
DISPLAY to display the following OSD menu items: TITLE/
TRACK, CHAPTER, TIME, REPEAT and PROGRAM.
To display the OSD menu using the PLAY
MODE button
Press PLAY MODE, then follow steps 3 through 5 above.
If you do not press
i / k within 10 seconds after pressing
PLAY MODE, the OSD menu disappears and the operation
is canceled.
To turn off the OSD menu, press PLAY MODE again.
PLAY MODE
i / k / j / l
ENTER
v RETURN
DISPLAY
Number
buttons
Basic operation of the On-Screen Display (OSD) menu
CONTINUE
You can check the general playback status, change the
play mode or locate a desired point on the disc, etc. by
displaying and operating the OSD menu.
When playing an audio CD, the OSD menu is displayed
without pressing DISPLAY allowing you to skip step 1 below.
1
Press DISPLAY.
The 1st (partial) display or 2nd (full) display of the OSD
menu appears on the TV screen.
b Go to step 2 if you
want to display the 2nd (full) OSD menu. Otherwise, go to
step 3.
The menu items differ depending on the disc type. See
"Example On-Screen Display (OSD) menu" on page 24.
2
Press i/k repeatedly to move the
cursor (blue area) to the top or bottom
item of the 1st (partial) OSD menu,
then press i/k again.
The 2nd (full) display of the OSD menu appears on the TV
screen.
3
Press i/k repeatedly to select the
desired menu item, then press ENTER
or the l right cursor button.
The symbol will be displayed if you press ENTER or the
l right cursor button at a menu item whose operation is
prohibited.