Aiwa HT-DV1 - Manual (Page 34)

34
ENGLISH
Changing the angle
When playing a DVD with multi-angle scenes
(photographed from several different angles), you can select
the angle you want to view. When a multi-angle scene
comes during playback, the angle symbol (see below) is
displayed for a few seconds on the TV screen to let you
know that you can change the angle.
Tip
The total number of angles recorded on a DVD usually
appears on its case within the following angle symbol.
3
1
Press DISPLAY during playback.
The OSD menu appears on the TV screen.
For details on how to operate the OSD menu, see "Basic
operation of the On-Screen Display (OSD) menu" on page
23.
2
Press i /k repeatedly to select
"ANGLE", then press ENTER or the l
right cursor button.
ANGLE 2 / 3
3
Press i/k repeatedly to select the
desired angle number.
Alternatively, use the number buttons.
NOTES
• The symbol appears if you press ENTER or l in
step 2 during playback of a disc with no multi-angle
scenes, or at a scene where the angle cannot be
changed.
• While the zoom function is active, the angle cannot be
changed.
• The mark search, chapter repeat and A-B repeat
functions do not work on multi-angle scenes.
Zooming the picture
This function allows you to zoom in and enlarge the picture
to 4 times.
1
Press DISPLAY during playback.
The OSD menu appears on the TV screen.
For details on how to operate the OSD menu, see "Basic
operation of the On-Screen Display (OSD) menu" on page
23.
2
Press i /k repeatedly to select
"ZOOM", then press ENTER or the l
right cursor button.
"ZOOM" appears on the TV screen for a few seconds.
The picture around the center is enlarged to four times.
To move the zoom area
Press i / k / j / l .
To return to the center, press C.
To cancel the zoom function
Press ENTER.
NOTES
• The zoom function may not work with some DVDs.
• The zoom function may not work on multi-angle scenes.
Number
buttons
Current angle number
Total number of angles
i / k / j / l
ENTER
DISPLAY
C
ZOOMING AND CHANGING THE ANGLE