Aiwa HT-DV1 - Manual (Page 41)

ENGLISH
41
AS NECESSAR
Y
En
All the basic settings of the system are properly
preset at the factory.
• Check that "Audio Output Setting" and "TV Aspect"
in the setup menu are correctly set according to the
type of equipment connected to the system. For
details on the settings, refer to "
2 Connecting to a
TV" on page 12 and "CONNECTING EXTERNAL
AUDIO EQUIPMENT" on page 40.
• Change any other settings according to your individual
setup preferences.
Basic operations in the setup menu
1
Press SETUP in stop mode.
The SETUP MENU screen is displayed on the TV screen.
ENTER : Choose item SETUP : Completion
SETUP MENU
Choose The Item ik
On-Screen Menu
Disc Languages
Audio Output Setting
TV Aspect
Ratings
2
Press i/k repeatedly to select the
menu item to be changed, then press
ENTER.
On-Screen Menu (page 42)
• Set whether the on-screen guide messages are to be
displayed or not.
• Set the on-screen menu language, English, Spanish or
French.
Disc Languages (page 43)
Set the audio soundtrack language, subtitle language and
the language used in the menu screen.
TV Aspect (page 45)
Set the aspect ratio of the television set connected to the
system.
Ratings (page 46)
When playing discs with preset restriction level encoding,
this setting allows the system to automatically cut scenes
of excessive violence, etc.
Audio Output Setting (page 47)
• Set audio output of the DVD player when an external
audio equipment is connected.
• Set individual speakers.
3
Press i/k repeatedly to select the
desired setting, then press ENTER.
The new setting is confirmed.
Note that some menu items require additional steps.
For details of the setting options for each menu item, see
the procedure of each setting in the following sections.
4
Press SETUP to exit the setup menu.
To exit the setup menu without making any
changes
Press one of the following buttons instead of pressing
ENTER in step 3.
v RETURN: Returns to the previous menu screen without
any changes.
SETUP: Exits the setup menu.
If 10 minutes have elapsed without any operation, the
system exits the setup menu automatically.
NOTE
The settings of the setup menu are stored in memory when
the system’s power is turned off. Therefore, before you
unplug the AC power cord from the AC outlet, turn the power
off by pressing POWER (
6 STANDBY/ON).
SETUP
i / k / j / l
ENTER
v RETURN
C Number
buttons
CHANGING SETUP VALUES
CONTINUE