Aiwa HT-DV1 - Manual (Page 31)

ENGLISH
31
MORE FEA
TURES
En
6
Repeat steps 4 and 5 to program other
tracks.
The program list can contain a total of 99 tracks on 4 pages.
Press
r / t to go to the previous or next page.
OSD on the TV screen Display window of the system
SELECT TRACK Program List 2/2
TRACK 3:12 TIME 3:16:32 TOTAL 32
Program Playback
002 012 - - - - - - - - -
- - - - - - - - - - - - - - -
- - - - - - - - - - - - - - -
- - - - - - - - - - - - - - -
- - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - Next
Prev
i j
k
012 / 015
ENTER : Memory
C : Clear
l : PLAY
RETURN : EXIT
q
w
e
q Scroll mark indicating there is a previous page
w Total number of tracks on the program list
e Track number currently selected
7
Press c.
Playback starts in the programmed order.
You can repeat playing a track or all tracks in the program.
For details, see "Repeat playback" on page 32.
To cancel programmed playback
In step 3, press i / k repeatedly to select "OFF", then press
ENTER.
Modifying the program
1
Follow the procedure of steps 1 and 2
in "Programming tracks" on page 30.
2
Press i /k repeatedly to select
"EDIT", then press ENTER.
The program list menu appears on the TV screen.
3
Edit the program as required.
To add a track to the program list
1 Press i / k repeatedly or use the number buttons to
select a desired track.
For how to enter a track number using the number
buttons, see step 4 in the previous page.
2 On the program list, press j / l to position the cursor
where you want to add the track.
3 Press ENTER.
The track is added to the program list. All the subsequent
tracks including the one at which you positioned the
cursor are shifted back by one position.
To delete a track from the program list
On the program list, press j / l repeatedly to select an
unwanted track, then press C.
The selected track is deleted. All the subsequent tracks
are shifted forward by one position.
Clearing the entire program
1
Follow the procedure of steps 1 and 2
in "Programming tracks" on page 30.
2
Press i/k repeatedly to select "ALL
CLEAR", then press ENTER.
The program is cleared.
NOTE
"ALL CLEAR" is not displayed when there is no program.