Aiwa HT-DV1 - Manual (Page 6)

6
ENGLISH
Handling discs
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not get
on the surface.
Do not stick paper or tape on the disc.
Cleaning discs
Fingerprints and dust on the disc can cause poor picture
quality and sound distortion. Before playing, clean the disc
with a clean cloth. Wipe the disc from the center out.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static spray
intended for analog records.
Storing discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of heat,
or leave it in a parked car exposed to direct sunlight, as
there may be a considerable temperature increase inside
the car.
Handling the system
When shipping the system
The original shipping carton and packing materials come
in handy. For maximum protection, repack the system as it
was originally packed at the factory.
When installing the system
The picture and sound of a nearby TV, VCR, or radio may
be distorted during playback. In this case, position the
system away from the TV, VCR, or radio, or turn off the
system after removing the disc.
To keep the surface clean
Do not use volatile liquids, such as insecticide spray, near
the system. Do not leave rubber or plastic products in
contact with the system for a long period of time. They will
leave marks on the surface.
Cleaning the system
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents, such as alcohol,
benzine, or thinner, as these might damage the surface of
the system.
To clean the pickup lens
Use a cotton swab slightly moistened with cleaning fluid.
Wipe gently from the center to the edge.
BEFORE USE (CONTINUED)