Aiwa HT-DV1 - Manual (Page 49)

ENGLISH
49
AS NECESSAR
Y
En
6 Press ENTER.
7 Repeat steps 4 to 6 to set the distances for other
speakers.
8 Press v RETURN to return to the previous menu
screen or press SETUP to exit the setup menu.
Test Sound:
A test tone is generated from each speaker allowing you to
check that the sounds from the respective speakers are
centered at the listening position. Use this function after
performing the "Speaker Setting" procedure.
1 In the SETUP MENU, press i / k repeatedly to
select "Audio Output Setting", then press ENTER.
2 Press i / k repeatedly to select "Test Sound".
Choose The Item ik
Digital Stream
dts Output
Downmix Type
Speaker Setting
Test Sound DOLBY DIGITAL
ON
Stereo
OFF
Audio Output Setting
RETURN : Previous menu ENTER : Choose item
SETUP : Completion
3 Press ENTER to turn on or off the speaker test.
Each time the button is pressed, the selection toggles
between "ON" and "OFF".
ON
The test tone is generated from each speaker in the
following order:
FRONT L CENTER FRONT R
SURROUND L SURROUND R
Check that the test tone from each speaker sounds the
same in volume at the listening position.
OFF
The system stops generating the test tone.
The system also stops generating the test tone when:
• you press
i / k to move to another menu item.
• you press SETUP to exit the setup menu.
• you open or close the disc cover.
• 10 minutes have elapsed without any operation.
• you turn off the power.
CONTINUE