Aiwa HT-DV1 - Manual (Page 33)

ENGLISH
33
MORE FEA
TURES
En
OFF:
Cancels repeat playback (normal playback).
Repeating a section between two
specified points (A-B repeat)
1
Select "A-B" in step 3 of the previous
section "Repeat playback".
2
Press ENTER at the desired start point
(A) of the section you want to repeat.
REPEAT A–
3
Press ENTER again at the desired end
point (B).
The system returns to point A and plays the section between
A and B repeatedly.
REPEAT A–B
To cancel A-B repeat playback
Press i / k repeatedly to select "OFF" in step 3 of "Repeat
playback", then press ENTER.
• Pressing r / t to select a chapter/track cancels
A-B repeat playback.
• Entering random or program play mode also cancels A-
B repeat playback.
NOTES
• If the section between A and B is less than a few seconds,
the A-B repeat play function may not work.
• A-B repeat mode is not selectable during programmed
or random playback.
• The A-B repeat play function works only when A and B
points fall within the same track.
REPEAT TRACK
REPEAT A–B
REPEAT OFF
REPEAT DISC
A-B:
Repeats a section between two specified points
on the disc.
DISC:
Repeats all tracks on the disc.
TRACK:
Repeats the track currently being played.
NOTES
• "REPEAT A-B" is only displayed during normal playback.
• "PROGRAM" is displayed instead of "DISC" during
programmed playback.
• Program repeat mode and track repeat mode are
selectable during programmed playback; and disc repeat
mode is selectable during random playback.
• Activating track repeat mode during random playback
turns off random play mode.
4
Press ENTER.
• When you selected A-B repeat mode in step 3
Go to step 2 of the next section "Repeating a section
between two specified points (A-B repeat)".
• When you selected a repeat mode other than A-B
repeat mode in step 3
The system starts repeat playback in the selected mode.
To cancel repeat playback
Press i / k repeatedly to select "OFF" in step 3, then press
ENTER.
The selected repeat mode is retained until the system is
turned off or the disc is removed.