Quick installation and setup overview – HP UPS Management Modules User Manual
Page 16
Overview 16
Software
Browser
resolution
high color (maximize browser window for optimal
display)
Quick installation and setup overview
1.
Install the HP UPS Management Module in the UPS ("
Installing the HP UPS Management Module
" on
).
2.
Install and configure the HP Power Protection Agents to communicate with the management module
("
Installing the HP UPS Power Protection Agent
" on page
).
3.
Access the HP UPS Management Module web interface ("
" on page
).
4.
Sign in to the web interface ("
Signing in to the web interface
" on page
).
5.
Add the HP Power Protection Agents to the web interface using the Add / Edit Attached Device
screen (on page
).
6.
Configure the power fail settings for each agent using the Power Fail screen ("
" on
).
7.
(optional) Configure additional settings using the menus on the Setup tab (on page
).