HP UPS Management Modules User Manual
Page 76
Advertising
HP UPS Management Module web interface 76
NOTE:
Depending on the specific UPS model, this screen will vary.
When a shutdown event occurs, the management module gracefully shuts down all attached devices and
UPS load segments. To specify an event for shutdown:
1.
Select Shutdown? for the event you want to configure.
2.
Enter the number of minutes to wait between the time the event occurs and the time the device shuts
down in the Delay (Minutes) field.
NOTE:
If the event clears before the delay time has expired, the shutdown is not executed.
3.
Do one of the following:
o
Click Save Settings to save the information.
o
Click Undo Changes to undo the changes.
o
Click Help to view online help.
Advertising