Network menu – HP UPS Management Modules User Manual
Page 61
HP UPS Management Module web interface 61
3.
If the user has administrator rights added or removed, select or deselect the Administrator checkbox.
4.
Click Save Settings to save the updated account information.
To delete a user account:
1.
Select the Delete checkbox for the user account that is to be removed.
2.
Click Delete Users to delete the user account. The account is removed and no longer appears on the
User Accounts screen.
Network menu
Click Network in the left navigation frame to access the Network screen. This screen enables
administrators to configure network settings for the management module.
The management module MAC address is displayed on the Network screen for informational purposes.
To configure the network settings:
1.
Select a radio button to enable or disable DHCP (IPv4). By default, DHCP (IPv4) is enabled.
2.
Change the IP address of the management module.
3.
Change the IPv4 network mask of the management module.
4.
Change the IPv4 default gateway of the management module.