HP Laserjet p3010 - Manual (Page 44)

Callout Area on the screen Information or capability that the area provides
4 Hard Drive and
Mass Storage
Security Settings
button The Perform Secure Storage Erase button allows you to perform disk wipes that
remove all data stored on any mass storage unit attached to the device.
NOTE: The settings for the type of Secure Storage Erase performed are configured
in the File Erase Mode section of the device's security settings page.
NOTE: Set the device's file system password before performing a Secure Storage
Erase operation. Set the file system password in the File System Password section
of the device's security settings page. See
Device Security Settings on page 35 .
NOTE: This button does not appear if the device does not have a mass storage
device installed.
NOTE: Click Apply Automatic Encryption Setting to enable encryption for an HP
Secure Hard Drive hard drive.
5 Status of Security
Settings This section presents a summary of the current security settings on the device. Modify
these settings by clicking on the Configure Security Settings button.
HP Jetdirect Security Configuration Wizard
Use the HP Jetdirect Security Configuration Wizard to HP Jetdirect print server management.
HP Web Jetadmin is a powerful Web-based software tool for installing, configuring, and managing
network-connected devices. Since it can install and configure devices, it must be able to secure itself
against unwanted access. Not only can HP Web Jetadmin secure itself against unwanted users, it can
also secure the devices it manages against unwanted access. Securing devices is important for the
following reasons:
● Reduce printer down time
● Reduce help desk calls
● Minimize troubleshooting visits
● Minimize consumable usage
NOTE: If you use HP Web Jetadmin to configure your printer, HP recommends that you configure
HP Jetdirect security settings with HP Web Jetadmin.
HP Jetdirect firmware enhancements and revisions address product performance and security issues.
Make sure the firmware on the printer is the latest revision level to ensure maximum security. HP Web
Jetadmin provides the ability to upgrade HP Jetdirect firmware either individually or in batches.
The following illustration describes how to use this screen.
Table 3-6 Security (continued)
34 Chapter 3 Configuring the product from the Settings screens ENWW