HP Laserjet p3010 - Manual (Page 28)

Print
NOTE: The Print screen (and the Print menu on the left) is available only if it has been configured to
appear on the Security screen under the Settings tab. Use the Security screen to disable the Print
screen if you do not want it to appear for security reasons. For more information, see
Security
on page 33 .
Use the Print screen for print-ready files or to remotely update the product firmware.
Use the Print screen to print one file at a time from a product that supports the HP EWS. This feature
is especially useful for a mobile user, because you do not have to install the product's print driver to
print; you can print from anywhere at any time.
You can print all print-ready files, such as the documents generated by using a "print to file" driver option.
Print-ready files commonly have file name extensions such as PS (PostScript), PDF (Adobe Portable
Document Format), and PRN (Windows print-ready File).
You can also use the Print screen to update your product firmware. This feature is especially useful
because you do not have to install more software to update the product firmware. When updated
firmware files are available for your product, download them from your product support Web site:
www.hp.com/go/ljp3010_firmware
The following illustration and table describe how to use this screen.
Figure 2-10 Print screen
1
2
3
Table 2-6 Print page
Callout Area on screen Information or capability that the area provides
1 HP EWS tabs and
menus For more information, see Navigating through the HP Embedded Web Server
on page 4 .
2 Device Status Shows the device status (the same information that displays on the Device Status
screen and the control-panel display).
NOTE: The printer must have a Ready status to receive firmware updates and print-
ready files.
3 Choose File Allows you to select a file for printing located on your laptop, computer, or a network
file server.
18 Chapter 2 Viewing product status from the HP EWS Information screens ENWW