HP Laserjet p3010 - Manual (Page 50)

Callout Area on the screen Information or capability that the area provides
9 Options for
Services Use the Options for Services section to enable/disable selected device services that
have a security impact. The section contains the following:
● Remote Firmware Upgrade–check box. Select Remote Firmware Upgradeto
allow the device to accept RFU upgrades.
● Service Loading–check box. Select Service Loading to allow installation of 3rd
party services. Many of these applications provide new functionality, such as job
accounting.
● Job Retention–check box. Select Job Retention to allow print jobs to be stored
on the device as stored jobs. This feature provides job retention options such as
private job and hold job. Users will be able to ensure that they are present during
printing to provide privacy for documents in the device output bins.
● Job Held Timeout–Selection field with the options of Never Delete, Held 1 Hr,
Held 4 Hrs, Held 1 Day, and Held 1 Week. This option is only applicable if Job
Retention is enabled. It limits a held job to the selected time, and then the device
deletes it. You should select a reasonable timeout value for this setting to allow
enough time for a user to walk to the device to print a job or to allow time for jobs
to print in line at the queue.
10 Direct Ports (USB/
IEEE 1284) Use the Direct Ports (USB/IEEE 1284) section to enable/disable the direct ports.
When the ports are disabled, printing is only available through a network connection.
The section contains the following:
● Disable Direct Ports–check box. Select Disable Direct Ports to disable the
direct ports.
11 Apply Your
Configurations Click Apply to configure the new settings. The Security page opens showing the new
status of the configurations. Click the Cancel button to cancel the settings that were
entered.
NOTE: A Service Password section will be visible if a user logs on as a service. The Service
Password section contains an Old Password, New Password, and Verify Password field. The
Service Password must be 16 characters or less.
Table 3-7 Configure Security Settings (continued)
40 Chapter 3 Configuring the product from the Settings screens ENWW