Date & time–nts settings, Figure 3-19 date & time–nts settings screen – HP Laserjet p3010 User Manual
Page 60
Date & Time–NTS Settings
Use the Date & Time–NTS Settings screen to synchronize the HP EWS with a network time server.
The following illustration shows the screen.
Figure 3-19
Date & Time–NTS Settings screen
To configure a network time server to correct the product clock drift, use the following procedure.
NOTE:
This process keeps the clock from drifting (losing or gaining time), but does not synchronize
the clock with the network time server clock.
1.
Type the network time server's TCP/IP address or host name in the Network Time Server
Address field. This is the network time server the HP EWS uses for synchronization.
2.
In the Synchronize Time with Server every field, type the interval you want the synchronization
to occur.
3.
In the Local Port to Receive Time from Server field, type the number of the appropriate port.
4.
Click OK to save your settings.
5.
Click Synchronize Now to synchronize immediately. If you do not click Synchronize Now the
clock synchronizes at the next scheduled time.
50
Chapter 3 Configuring the product from the Settings screens
ENWW