HP Laserjet p3010 - Manual (Page 49)

Callout Area on the screen Information or capability that the area provides
6 File Erase Mode Use the File Erase Mode section to select the disk erase mode. The File System
Access password must be set in order to select a mode. The section contains the
following:
● Non-Secure Fast Erase–radio button. Select this to put the device in Non-Secure
File Erase mode. It is the fastest method that clears files by removing their
identities.
● Secure Fast Erase–radio button. Select this to put the device in Secure Fast
Erase Mode. It is a slightly slower method that clears files by writing over them
with arbitrary characters.
● Secure Sanitize Erase–radio button. Select this to put the device in Secure
Sanitize Erase Mode. It is the slowest method that clears files by writing over them
three times.
7 Control Panel
Access Lock Use the Control Panel Access Lock section to select the control panel lock level. The
section contains the following:
● Unlock–radio button. Select Unlock to turn off the control panel lock and allow
users full access to the control panel menus (excluding the Service menu).
● Minimum Menu Lock–radio button. Select Minimum Menu Lock to set the
control panel lock to the Minimum level. This option removes only system settings
menus that affect the device on the network.
● Moderate Menu Lock–radio button. Select Moderate Menu Lock to set the
control panel lock to the Moderate level. This option removes all settings menus
other than those for specific jobs.
● Intermediate Menu Lock–radio button. Select Intermediate Menu Lock to set
the control panel lock to the Intermediate level. This option removes the paper
handling menu and all settings menus other than those for specific jobs.
● Maximum Menu Lock–radio button. Select Maximum Menu Lock to set the
control panel lock to the Maximum level. This option removes all configuration
settings menus.
Once the Control Panel Access Lock is configured, no one can access these settings
on the control panel. The device does not provide a way for authorized use of these
settings.
8 Embedded Web
Server Options Use the Embedded Web Server Options section to select which options are enabled/
disabled on the EWS Webpage. The section contains the following:
● Display Print Page on Information Tab–check box. Check this box to enable
the Print Page feature in EWS. The Print Page option allows users the
convenience of printing via the EWS.
● Display Color Usage Job Log Page on Information Tab–check box. Check
this box to display the Color Usage Job Log page on the Information tab. This is
only available on color capable products.
● Cancel Job Button–check box. Check this box to enable the Cancel button on
the EWS Web page. Disabling this option prevents users from tampering with
cancel operations on the device.
● Pause/Resume Button–check box. Check this box to enable the Pause/Resume
button on the EWS Web page. Disabling this option prevents users from
tampering with pause/resume operations on the device.
● Continue Button–check box. Check this box to enable the Continue button on
the EWS Web page. Disabling this option prevents users from tampering with
continue operations on the device.
Table 3-7 Configure Security Settings (continued)
ENWW Security 39