HP Laserjet p3010 - Manual (Page 13)

Opening the HP Embedded Web Server
Use the following procedure to open the HP EWS.
NOTE: You cannot view the HP EWS screens from outside a firewall.
1. Open a supported Web browser.
2. In the Address or Go to field, type the IPv4 or IPv6 TCP/IP address, the host name, or the
configured host name assigned to the product. See the following examples.
● IPv4 TCP/IP address: http://192.168.1.1
● IPv6 TCP/IP address: http://[2001:0ba0:0000:0000:0000:0000:0000:1234]
● Host name: npiXXXXXX
If you do not know the TCP/IP address for the product, find it by using the control-panel menu or by
printing a configuration page. For instructions, see the user guide that came with your product.
Login and logoff
The HP EWS screens are used to view product information and change configuration options. The
screens and settings vary according to how you access the HP EWS: as a general user, an information
technology (IT) administrator, or a service provider. These passwords can be customized by an IT
administrator or a service provider.
In a password-protected HP EWS, only the Information tab is available to users who do not log in by
using the password. If no password has been set (which is the default), all the tabs are visible.
If a password has been set, you must log on as an IT administrator or a service provider to gain access
to the protected HP EWS tabs (Settings and Networking).
NOTE: For information about changing passwords as an IT administrator, see Security
on page 33 . If you are a service provider, see your product service guide.
To log in as an administrator
Use the following procedure to log in to the HP EWS as an administrator.
1. After you open the HP EWS, click the Log In link in the upper-right corner of the screen.
The Enter Network Password dialog box displays. The appearance of the login screen might vary,
depending on your operating system and browser.
2. Type admin for the user name, type your password, and then click OK.
To log off as an administrator
Use the following procedure to log off.
1. Click the Log Off link.
2. To complete the logoff, close the browser.
CAUTION: If you do not close the browser, the connection to the product HP EWS continues to run
and could pose security risks.
ENWW Opening the HP Embedded Web Server 3