HP Surestore 64 Director Switch - Manual (Page 102)

90 show
Reason An optional message number that indicates if the port has a segmented ISL
or if a port binding violation has occurred. The message description for this
message number is provided at the bottom of the table.
State is Segmented E_Port
0 Segment Not Defined
1 Incompatible Operating Parameters
2 Duplicate Domain ID(s)
3 Incompatible Zoning Configurations
4 Build Fabric Protocol Error
5 No Principal Switch
6 No Response from Attached Switch
7 ELP Retransmission Failure Timeout
State is Invalid Attachment
0 Unknown
1 ISL connection not allowed on this port.
2 ELP rejected by the attached switch.
3 Incompatible switch at other end of the ISL.
4 External loopback adapter connected to the port.
5 N_Port connection not allowed on this port.
6 Non-McDATA switch at other end of the ISL.
7 ISL connection not allowed on this port.
8 ISL connection not allowed to external Fabrics.
9 Port binding violation—unauthorized WWN.