HP Surestore 64 Director Switch User Manual
Page 49
config 37
CLI Com
m
a
nds
Command Example
Root>
config snmp show
Output
The switch configuration data is displayed as a table that includes the following properties
Output Example
The output from the config.snmp.show command displays as follows.
Authorization Traps: Enabled
Index Community Name WriteAuth Trap Recipient UDP Port
----- -------------------------------- --------- --------------- --------
1 CommunityName1 Enabled 123.123.123.123 162
2 CommunityName2 Enabled 10.25.25.10 144
3 CommunityName3 Disabled 132.44.85.224 162
4 public Enabled 162
5
6
commIndex
The community index number.
commName
The name of the community.
writeAuthorization
The write authorization state.
trapRecipient
The address of the trap recipient.
udpPortNum
The UDP port number to which the director will send traps for each recipient.