HP Surestore 64 Director Switch - Manual (Page 69)

config 57
CLI Com
m
a
nds
config.zoning.addPortMem
Syntax
addPortMem “zoneName” domainId portNumber
Purpose
This command adds the domain ID and port number of a zone member to the specified
zone in the work area.
Description
The CLI supports the number of zones members per zone specified for a given product.
Parameters
This command has one parameter.
Command Example
Root> config zoning addPortMem TheUltimateZone 10 6
zoneName Specifies the name of the zone.
domainId Specifies the domain ID of the member to be added to the zone. Valid values
are in the range 1–31.
portNumber Specifies the port number of the member to be added to the zone. Valid port
number values are:
0–63 for the FC-64