HP Surestore 64 Director Switch - Manual (Page 61)

config 49
CLI Com
m
a
nds
Purpose
This command shows the system configuration.
Parameters
This command has no parameters.
Command Example
Root> config system show
Output
The system configuration is displayed as a table that includes the following properties.
Output Examples
The output from the config.system.show command displays as follows.
Name: Joe’s Switch
Description: HP Surestore Director FC-64
Contact: Joe
Location: Everywhere
Date/Time: 04/16/2001 10:34:01
Name The system name.
Description The system description.
Contact The system contact.
Location The system location.
Date/Time The system date and time.