Maint.system.setonlinestate – HP Surestore 64 Director Switch User Manual
Page 80
Advertising
68 maint
Note
This command resets all configuration data and non-volatile settings, including
network information, to their default values (factory settings). Management
access may be lost until the network information is restored.
Parameters
This command has no parameters.
Command Example
Root>
maint system resetConfig
maint.system.setOnlineState
Syntax
setOnlineState onlineState
Purpose
This command sets the switch online or offline.
Parameters
This command has one parameter.
Command Examples
Root>
maint system setOnlineState true|
Root>
maint system setOnlineState 1
onlineState
Specifies whether the switch is online. Valid values are
true
and
false
.
Boolean 1 and 0 may be substituted as values.
Advertising