HP LaserJet M4349 Multifunction Printer series - Manual (Page 154)

Analog fax
When the HP LaserJet Analog Fax Accessory 300 is installed, the device can function as a standalone
fax machine.
NOTE: The HP LaserJet M4349x MFP comes with an HP LaserJet Analog Fax Accessory 300
installed.
Install the fax accessory
If your device does not have the HP LaserJet Analog Fax Accessory 300 installed, use the following
procedure to install it.
1. Unpack the fax accessory from the box, but do not remove it from the antistatic pouch.
2. Turn off the device, and unplug the power cable.
3. At the back of the device, remove the side cover by placing your fingers in the indented area and
sliding the cover off.
4. If necessary, remove the plastic fax-accessory cover from the formatter. Insert a coin into the
groove at the top of the cover, and use it to pry the cover away from the formatter.
140 Chapter 9 Fax ENWW