HP LaserJet M4349 Multifunction Printer series User Manual
Page 155
5.
Open the formatter-cage door by grasping the metal tab and pulling the door open.
6.
If you are replacing an existing fax accessory, remove the old card from the formatter by pulling it
out of the slot.
7.
Remove the new fax accessory from the antistatic pouch.
CAUTION:
The fax accessory contains parts that are sensitive to electrostatic discharge (ESD).
When handling the fax accessory, use static protection such as a grounding wrist strap that is
connected to the metal frame of the device, or touch the metal frame of the device with your other
hand.
CAUTION:
When handling the fax accessory, do not press the yellow component on the card.
Doing so can damage the card and cause a fax malfunction.
8.
Align the two cutouts on the new fax accessory with the two fax-accessory guides on the formatter.
9.
Push the fax accessory into place, and then verify that it is securely connected to the formatter.
The phone connector on the fax accessory should be aligned with the square opening in the
formatter cage.
10.
Close the formatter-cage door.
ENWW
Analog fax 141