HP LaserJet M4349 Multifunction Printer series - Manual (Page 258)

Declaration of conformity
Declaration of Conformity
according to ISO/IEC Guide 22 and EN 45014
Manufacturer's Name:
Hewlett-Packard Company
DoC#: BOISB-0407-01-Rel. 6
Manufacturer's Address: 11311 Chinden Boulevard,
Boise, Idaho 83714-1021, USA
declares, that the product
Product Name: HP LaserJet M4345/M4349 MFP Series
Regulatory Model Number 3) : BOISB-0407-00 and BOISB-0407-01
Including: Q5691A, Q5692A, Q5968A, BOISB-0308-00 3)
Product Options: ALL
Toner Cartridges: Q5945A, CE267C
conforms to the following Product Specifications:
Safety: IEC 60950-1:2001 / EN60950-1: 2001 +A11
IEC 60825-1:1993 +A1 +A2 / EN 60825-1:1994 +A1 +A2 (Class 1 Laser/LED Product)
GB4943-2001
EMC: CISPR 22:2005/EN 55022:2006 -- Class B 1)
EN 61000-3-2:2006
EN 61000-3-3:1995 +A1
EN 55024:1998 +A1 +A2
FCC Title 47 CFR, Part 15 Class B
2) / ICES-003, Issue 4
GB9254-1998, GB17625.1-2003
Telecom: 4) TBR-21:1998; EG 201 121:1998
Supplementary Information:
The product herewith complies with the requirements of the R&TTE Directive 1999/5/EC Annex II, EMC Directive 2004/108/EC and the Low
Voltage Directive 2006/95/EC, and carries the CE-Marking
accordingly.
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2) For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the marketing
names or the product number(s).
3) All worldwide modular approvals for analog fax accessory obtained by Hewlett-Packard under the regulatory model number BOISB-0308-00
incorporate the Multi-Tech Systems MT5634SMI Socket Modem Module.
4) Telecom standards and R&TTE Directive compliance apply to BOISB-0407-01.
Boise, Idaho , USA
March 2009
For regulatory topics only:
European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-TRE / Standards
Europe, Herrenberger Strasse 140, D-71034 Böblingen, Germany, (FAX: +49-7031-14-3143) www.hp.com/go/
certificates
USA Contact: Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160, Boise, ID 83707-0015, USA,
(Phone: 208-396-6000)
244 Appendix C Regulatory information ENWW