Automatically enhance your photos, Print a frame around your photo – HP Photosmart C6340 All-in-One Printer User Manual
Page 102
An outline appears on the photo to show you an approximate view of the area that
will print.
4.
Press the arrows on the directional pad to pan around the photo and select a specific
area to print.
5.
Press OK to crop the photo.
Related topics
•
•
“Make reprints of your photos” on page 117
Automatically enhance your photos
The HP All-in-One is set up, by default, to enhance your photos automatically when you
print them. When this feature is enabled, the HP All-in-One uses HP Real Life
Technologies to:
•
Adjust the brightness or darkness of your photos (shown in print preview and printed
output)
•
Adjust the lighting to make dark images appear brighter (shown on printed output
only)
•
Sharpen blurry images (shown on printed output only)
You can turn off the automatic photo enhancement feature for individual photos, on a per-
image basis.
To turn off automatic photo enhancement
1.
Press the Menu button on the photo selection screen.
2.
In the Edit Photo menu, press the up arrow or down arrow button to highlight Photo
Fix, and then press OK.
3.
Press the up arrow or down arrow button to highlight Off, and then press OK.
Related topics
Print a frame around your photo
You can print a decorative colored border around the outside edge of your photo to frame
the photo.
NOTE:
The changes you make to the photo apply only to viewing and printing the
photo. The changes will not be saved on the memory card.
Edit photos using the control panel
99
Phot
os