Carriage stall – HP Photosmart C6340 All-in-One Printer User Manual
Page 263
Solution 2: Contact HP support
Solution: You can continue to print from your product, but for optimum print quality
you should align the printhead. If the alignment still will not work and print quality is
unacceptable, contact HP support for service. Go to:
.
If prompted, choose your country/region, and then click Contact HP for information
on calling for technical support.
Cause: The print carriage or sensor was defective.
Carriage stall
Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.
•
Solution 1: Print a printer status report
•
Solution 2: Remove objects blocking the path
•
Solution 3: Ensure that the product is connected to a suitable power source
Solution 1: Print a printer status report
Solution: Print a printer status report to see if the product can print.
For more information, see:
“Print and evaluate a print quality report” on page 129
If the product can print a printer status report and can print from the computer (if
applicable), then there is no need to follow the remaining solutions, as the error
message might be false.
Cause: The error was false.
If this did not solve the issue, try the next solution.
Chapter 14
260
Troubleshooting
T
roub
les
hoot
ing