HP Photosmart C6340 All-in-One Printer - Manual (Page 108)

To save a scan to the memory card or storage device
1. Make sure your memory card is inserted into the appropriate slot on the product, or
a storage device is connected to the front USB port.
2. Load your original print side down on the right front corner of the glass.
3. Press Start Scan.
4. Press the down arrow button to highlight Scan to Memory Card or Scan to USB
Flash Drive, and then press OK.
The product scans the image and saves the file to the memory card or storage device
in the JPEG format.
Edit a scanned image
You can edit a scanned image, such as a photo or graphic, using the software you
installed with the HP All-in-One. Using this software, you can rotate or crop the image,
as well as adjust the brightness, contrast, and color saturation.
Related topics
“Use the HP Photosmart Software” on page 15
Edit a scanned document
You can edit a scanned document using your Optical Character Recognition (OCR)
software. Scanning text using OCR software enables you to bring the content of magazine
articles, books, and other printed matter into your favorite word processor and many other
applications as editable text. Learning to use OCR software correctly is important if you
want to obtain the best results. Do not expect scanned text documents to be letter-perfect
the first time you use your OCR software. Using OCR software is an art that takes time
and practice to master.
Related topics
“Use the HP Photosmart Software” on page 15
Edit a scanned document 105
Scan