The product prints meaningless characters, Nothing happens when i try to print, Solution 10: reset the product – HP Photosmart C6340 All-in-One Printer User Manual

Page 185

Advertising

Solution 10: Reset the product

Solution: Turn off the product, and then unplug the power cord. Plug the power
cord back in, and then press the On button to turn on the product.
Cause: The product experienced an error.

The product prints meaningless characters

Try the following solutions to resolve the issue. Solutions are listed in order, with the most
likely solution first. If the first solution does not solve the problem, continue trying the
remaining solutions until the issue is resolved.

•

Solution 1: Reset the product

•

Solution 2: Print a previously saved version of the document

Solution 1: Reset the product

Solution: Turn off the product and your computer for 60 seconds, then turn them
both on and try printing again.
Cause: There was no available memory in the product.
If this did not solve the issue, try the next solution.

Solution 2: Print a previously saved version of the document

Solution: Try printing another document from the same software application. If this
works, then try printing a previously saved version of the document that is not corrupt.
Cause: The document was corrupt.

Nothing happens when I try to print

•

Solution 1: Turn on the product

•

Solution 2: Load paper in the input tray

•

Solution 3: Select the correct printer

•

Solution 4: Check the printer driver status

•

Solution 5: Wait until the product completes the current operation

•