HP Designjet 700 Printer series - Manual (Page 120)

Full menu mode
Defaults:
Palette: Factory
Width: 0.35 mm
Color: (see
Palette Print)
Pen settings
Define palette
PS
5-6
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 5-6 (seq: 118)
This is the black on page 5-6 (seq: 118)
To Change the Palette Settings
There are three palettes: Factory, Palette A and Palette B. You cannot change the
Factory palette, but you can define Palettes A and B to be whatever you choose.
Item Available Options
Palettes Factory, A, B.
Pens 0 through 15.
Widths (mm) 0.13, 0.18, 0.25, 0.35, 0.50, 0.65, 0.70, 0.80, 0.90, 1.00,
1.40, 2.00, 3.00, 5.00, 8.00, 12.00.
Note that 0.13 mm is a one-pixel line width and renders
some colors as a dot pattern.
Colors 0 through 255.
As specified on the Palette Print.
The steps below explain how to define Palette A.
1 In the front-panel display, go to the Define Palette routine and choose Palette A .
2 Scroll to the pen number you want to change and press Enter .
3 The current width assigned to this pen is displayed, for example Width=0.35mm . If
you want to change it, press Enter , scroll to the width you want and then press
Enter again. Otherwise, scroll to Color .
4 The current color assigned to the pen is displayed, for example Color=110 . If you
want to change it, press Enter , scroll to the color you want and then press Enter
again.
5 When both width and color are correct, press Previous .
6 Scroll to the next pen number you want to change, press Enter and do steps 3
through 5 again.
7 When all pen definitions are correct, press Previous until you have exited the
menus.
IMPORTANT. The palette you have just defined will take effect only when you
select it to be the current palette, as explained next.
Controlling a Print’s Overall Appearance
Changing Pen Widths and Colors Using the Printer’s Internal Palettes