HP Designjet 700 Printer series - Manual (Page 179)

9-23
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 9-23 (seq: 177)
This is the black on page 9-23 (seq: 177)
Solving Miscellaneous Problems
If the Printer Does not Print
You may have a power problem. If there is no activity at all from the printer,
and no lights on the front panel, check that the power cable is connected cor-
rectly and that there is power available at the socket.
You may have a problem with your application driver. Is your software confi-
gured for this printer? For general advice, see page 1-32. For advice specific to
your software, see either the documentation supplied with the driver or a rele-
vant Software Application Note supplied with your printer.
The file may be too big for the printer’s memory. Look on your computer
screen for any error message: some drivers, for example the Microsoft Windows
driver supplied with your printer, allow you to choose a different printing mode
and try to send the file again.
If you continue to have problems, see “Getting help” on page 9-25.
If the Printer Seems Too Slow
Did you specify Best Print Quality level on the front panel? Best quality
prints are produced more slowly. See page 5-12.
Did you specify the right media type when loading the media? For details of
front-panel media types, see page 3-3. To find out the printer’s current media
type setting, see page 7-2.
If you are using the non-PostScript Microsoft Windows driver shipped with the
printer, check the settings in the “Print Setup / Options” dialog box, where some
of the settings impact printing speed. If in doubt, use the on-screen help system.
Is Sharp lines set to Auto on the front panel or in your driver? If so, setting it to
Off will speed up your printer but may reduce the quality of your print. See
page 5-15.
This is the magenta on page 9-23 (seq: 177)
TROUBLE- SHOOTING
9
Troubleshooting
Solving Miscellaneous Problems
?