HP Designjet 700 Printer series User Manual
Page 180
9-24
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 9-24 (seq: 178)
This is the black on page 9-24 (seq: 178)
If the Printer Waits Too Long to Print a Nest
Change the
Nest wait
setting. See page 6-11.
If the Printer Performs the Cartridge Alignment Routine
Unexpectedly
This is a normal printer operation. The printer will align the cartridges every
time you replace, or even reseat, a cartridge, whether or not it is new.
If the Bail (Black Metal Bar) Does Not Lower All the Way
If the the bail (the black metal bar just inside the printer’s window) will not
lower all the way, check for obstructions underneath it.
Make sure the cutting carriage is pushed all the way to the right.
Troubleshooting
Solving Miscellaneous Problems