HP Designjet 700 Printer series - Manual (Page 52)

1-34
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 1-34 (seq: 50)
This is the black on page 1-34 (seq: 50)
Software and Accessories Supplied with This Printer
Use the information in the table below to decide if you need to install and set up
any of the software supplied with this printer.
Item For use on Installation and Setup
HP JetDirect
Print Server Macintosh
Unix
PC
Hardware pre-installed in your printer.
Set up the software, as instructed in the
HP JetDirect documentation.
HP DesignJet
PostScript Drivers
1
Macintosh
PC
Firmware pre-installed in your printer.
Install the software on your computer.
Set up the software, as instructed in the
documentation supplied.
HP Driver for Microsoft
Windows 95 and 3.1
Applications 1
PC Install the software on your computer.
Set up the software, as instructed in the
driver documentation.
HP Drivers for
AutoCAD
1
PC Install the software on your computer.
Set up the software, as instructed in the
driver documentation.
Color Management
Kit Macintosh
PC
Install the profiles on your computer.
Set up the software, as instructed in the
Color Management Kit documentation.
1 These items are updated from time to time. For details of which software
versions are supported, see the documentation included with them.
Note for users of Microsoft Windows applications
In most cases, you can use either of the following two drivers:
HP Driver for Microsoft Windows
HP DesignJet PostScript Driver for Microsoft Windows
If your files include embedded EPS (encapsulated PostScript) images, use the
PostScript driver. To use one, you do not need to install the other as well, but you
can install both if you wish.
Setting Up the Printer
Task 8: Set Up Your Software