HP Designjet 700 Printer series User Manual
Page 82
3-12
Company confidential. Postillo/755CM User’s Guide Final Freeze Status:Frozen
This is the cyan on page 3-12 (seq: 80)
This is the black on page 3-12 (seq: 80)
8
Push the endcap back in, making sure that the tabs are flush against the ends of
the roll. Push it far enough to be firm, but do not use excessive force as this
may result in broken tabs.
B
0016
9
Insert the spindle so that the media stop (A) is to the right and the endcap (B)
to the left. Push in firmly on both ends. Be sure the media remains flush
against the media stop.
The media should wind up from behind the roll.
A
Media path
A
B
1837
0017
10
Check the leading edge as it unwinds from the spool. If it is uneven, trim it as
explained in step 11. Otherwise go to step 12.
Working with Media and Cartridges
Loading Media