HP StorageWorks XP Remote Web Console Software User Manual
Page 16
16
Preparing for External Storage XP operations
HP StorageWorks XP1024/XP128 Disk Array
•
In External Storage XP panes, the arrays appear as
“1024” and “128”, respectively.
•
Alternate paths are in Multi mode.
HP StorageWorks XP512/XP48 Disk Array
•
In External Storage XP panes, the arrays appear as
“512” and “48”, respectively.
•
Alternate paths are in Multi mode.
HP StorageWorks XP256 Disk Array
•
In External Storage XP panes, the array appears as
“256”.
•
Alternate paths are in Multi mode.
HP StorageWorks 200 Storage Virtualization System
•
In External Storage XP panes, the array appears as
“SVS200”.
•
Alternate paths are in Multi mode.
HP StorageWorks 3000/5000 Enterprise Virtual Array
(Active/Standby and Active/Active controllers) or
HP StorageWorks 4000/6000/8000 Enterprise Virtual
Array (Active/Active controllers)
•
In this user guide, the arrays appear as “EVA
array”.
•
In External Storage XP panes, the arrays appear as
“EVA”.
•
Alternate paths are in Single mode (meaning that
dynamic load balancing across multiple active paths
is not enabled).
HP StorageWorks MSA1000/1500 (Active/Standby)
•
In this user guide, the arrays appear as “MSA
array”.
•
In External Storage XP panes, the arrays appear as
“MSA”.
•
Alternate paths are in Single mode.
TagmaStore™ Universal Storage Platform subsystem
•
In this user guide, the array appears as
“TagmaStore™ USP subsystem”.
•
In External Storage XP panes, the array appears as
“USP”.
•
Alternate paths are in Multi mode.
TagmaStore™ Network Storage Controller subsystem
•
In this user guide, the array appears as
“TagmaStore™ NSC subsystem”.
•
In External Storage XP panes, the array appears as
“NSC”.
•
Alternate paths are in Multi mode.
TagmaStore™ Adaptable Modular Storage subsystem
•
In this user guide, the array appears as
“TagmaStore™ AMS subsystem”.
•
In External Storage XP panes, the array appears as
“AMS”.
•
Alternate paths are in Single mode.
TagmaStore™ Workgroup Modular Storage subsystem
•
In this user guide, the array appears as
“TagmaStore™ WMS subsystem”.
•
In External Storage XP panes, the array appears as
“NSC”.
•
Alternate paths are in Single mode.
Table 2
Storage arrays that can be connected as external arrays (continued)
Storage array
Notes