HP StorageWorks XP Remote Web Console Software - Manual (Page 60)

60 External Storage XP panes
• Ex-Dev. Status: Status of the operation executed to the external array, or status of the path
connection. Possible values: Normal, Unknown, Blockade, Warning, Checking, Cache Destage,
and Disconnect. For a description of these values, see Table 8 .
• LDEV Status: Mapped external LU’s status. Possible values: Normal, Unknown, Blockade, Warning,
and Format. For a description of these values, see Table 9 .
• Progress: When Status is Cache Destage, displays the destaging process progress, from 1% to
100%.
• Characteristic2: External LU’s extended identifying information. This information is used for
identifying logical volumes in the EVA array. For more information, see ” Identifying logical
volumes of EVA arrays (using Characteristic 2) ” on page 138.
• Discovery
• WWN: World Wide Name identifying the port in the external array that can be set.
• Serial: Product serial number.
• Product: Product name.
• Vendor: Vendor name.
• WWN of the external array
• LUN: LU number in the external array.
• Characteristic: External LU’s ID number.
• Device: External LU’s device name.
• Ex-Dev. info.: Information about the external array. When the external array is an SATA/FATA
drive, an asterisk (*) appears.
• VMA: Information about the VMA setting by LUN Security XP Extension. When VMA is set for the
volume, an asterisk (*) appears.
• Capacity: External LU’s capacity in blocks.
• Characteristic2: External LU’s extended identifying information. This information is used for
identifying logical volumes in the EVA array. For more information, see ” Identifying logical
volumes of EVA arrays (using Characteristic 2) ” on page 138.
WWN tree
Displays information about items set in the Device tree. The contents of the WWN list changes depending
on the items selected in the WWN tree.
Figure 31 WWN tree
• Subsystem
When selected, displays nothing in the WWN tree. Subsystem is selected when you initially display
the WWN tree.
• External Devices
When selected, displays information about the external array connected to the external port in the
WWN list.
• Product name of the connected external array
When selected, displays the name of the external array for which the connection setting is already
completed in the tree under External Devices.
• WWN of the external array
When selected, displays WWNs identifying ports on the connected external array in the tree under
the name of the external array product.