HP StorageWorks XP Remote Web Console Software - Manual (Page 66)

66 External Storage XP panes
• Characteristic2: External LU’s extended identifying information. This information is used for
identifying logical volumes in the EVA array. For more information, see ” Identifying logical
volumes of EVA arrays (using Characteristic 2) ” on page 138.
Filter button
Displays the Filter window where you can restrict LUs displayed in the Device list.
Figure 35 Filter window
This window contains Enable and Disable options that control the display of unsupported devices. When
you select Enable, information about unsupported arrays appears in the Device tree and Device list.
Unsupported arrays are indicated by Unknown Devices in the Device tree and Device list.
The Disable option is selected by default.
Preset list (LU Operation pane)
Displays rows from the Device list that are about to be acted upon. You can apply settings to the local array
after checking the contents in the Preset list. Information displayed in the Preset list appears in blue italics
in the Device list. If you click Apply in the LU Operation pane, settings displayed in the Preset list are
applied to the local array. At that point, the contents of the Preset list disappear and the Device list appears
normally.
If you click Cancel in the LU Operation pane, all settings in the Preset list are canceled.
If settings in the Preset list contain errors, they are not applied to the local array even if you click Apply. In
that case, error messages appear and incorrect settings appear in the Preset list. In addition, error codes
appear in the Preset list.
NOTE: Depending on the type of errors that occur, identical error codes might be displayed for all errors
listed in the Preset list. In this case, check the status of settings to identify the source of the error.
When you right-click an item in the Preset list, the following commands appear:
• Detail