HP Designjet Z6200 Photo Printer - Manual (Page 137)

To ensure color consistency when reprinting the job, use the same paper type.
1. Check that the color calibration is valid for the paper type that is loaded in both printers. On the
front panel, select the
icon, and then select View loaded paper. In the Paper
information window, check that Color Calibration is OK. If the status of the Color
Calibration is Pending or Recommended, perform a color calibration from the HP Color
Center, or on the front panel.
2. Print the jobs.
Use ESRI ArcGIS 9 to print a map
ArcGIS is a scalable system of software for geographic data creation, management, integration,
analysis, and dissemination for every organization, from an individual to a globally distributed network
of people.
The software always sends RGB data to the printer driver. Select from several different printer engines.
The printer engine determines the format and method that ArcMap uses to send the print job to the
printer. One to three options are available, depending on license and printer configurations.
● Windows is the default and is always available, regardless of the printer that is in use. It allows
the software to use the installed HP-GL/2 and RTL driver
● PostScript is available only if your printer supports PostScript and when the PostScript driver has
been selected in the Name section. This allows you to output the file as a PostScript file. This
option might be useful in certain specific cases, but in general it is not recommended.
● ArcPress is an extension that can be purchased for printing from ArcGIS. It is a software RIP that
takes the original metafile and applies raster to it before sending it to the printer, so that the
printer does not need to. This is beneficial because some printers cannot apply raster or do not
have enough memory to process large jobs. Always use ArcPress with HP RTL (RGB) TrueColor.
Use the Windows printer engine
1. Make sure that you have installed the HP-GL/2 and RTL driver.
2. When you are ready to print, select File > Page and Print Setup, and select the HP-GL/2 and
RTL driver.
ENWW Use ESRI ArcGIS 9 to print a map 129
Printing examples