Tcp/ip connection – HP Designjet Z6200 Photo Printer User Manual
Page 25
●
If you find the right printer name, scroll sideways to see the Connection Type column, and
check that it shows Bonjour. Then highlight that line. Otherwise, continue searching further
down the list.
●
If you cannot find your printer name with a Bonjour connection type, check the box My
printer is not in the list.
Click Continue.
9.
Continue following the instructions on the screen. When you reach the Printer Queue Created
screen, click Quit to exit, or Create New Queue if you want to connect another printer to the
network.
10.
When the HP Printer Setup Assistant has finished, you can remove the DVD from the DVD drive.
If the printer driver is already installed, the HP Printer Setup Assistant can be run at any time from the
DVD.
TCP/IP connection
1.
Go to your printer's front panel and press the
Menu
key if necessary until you see the following
screen.
Note the URL of your printer (http://192.168.1.1 in this example).
2.
Insert the HP Start-up Kit DVD into your DVD drive.
ENWW
Connect to a network (Mac OS)
17
Connectivity