Insert a printhead – HP Designjet Z6200 Photo Printer User Manual
Page 74
Insert a printhead
1.
Remove the orange protective caps by pulling them down.
2.
The printhead is designed to prevent you from accidentally inserting it into the wrong slot. Check
that the colored label on the printhead matches the colored label of the carriage slot into which
the printhead is to be inserted.
3.
Insert the new printhead into its correct slot in the carriage.
CAUTION:
Insert the printhead slowly and vertically, straight down. It can be damaged if you
insert it too quickly, or at an angle, or if you rotate it as you insert it.
4.
Push down as indicated by the arrow.
CAUTION:
You might feel some resistance when installing the new printhead, so you need to
press it down firmly but smoothly. You should hear a beep and see confirmation on the front-panel
display that the printhead has been inserted. If you have difficulty, see
.
66
Chapter 5 Handle the ink system
ENWW
Handle t
h
e ink system