HP Designjet Z6200 Photo Printer - Manual (Page 42)

3. Remove the first end of the spindle from the right-hand side of the printer, and then move the
spindle to the right in order to extract the other end. Do not insert your fingers into the spindle
supports during the removal process.
The spindle has a hub at each end to keep the roll in position. Remove the blue hub at the left end
to mount a new roll. The hub slides along the spindle to hold rolls of different widths.
4. Slide the lever-lock on the blue hub to the unlocked position and remove the hub (1) from the left
end of the spindle.
5. Rest the roll of paper that you want to load on the loading table. The roll might be long and
heavy, and you might need two people to handle it.
34 Chapter 4 Handle the paper ENWW
H
a
ndle the paper