HP Designjet Z6200 Photo Printer - Manual (Page 214)

Table E-9 Printer power specifications (continued)
Current < 4 A
Consumption 350W maximum
Ecological specifications
This product complies with European Union WEEE and RoHS Directives.
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks To determine the ENERGY
STAR® qualification status of these product models. See: http://www.hp.com/go/energystar .
For up-to-date ecological specifications of your printer, please go to http://www.hp.com/ and search
for “ecological specifications”.
Environmental specifications
Table E-10 Printer environmental specifications
Relative humidity range for best print quality 20–80%, depending on paper type
Temperature range for best print quality 15 to 30°C (59 to 86°F), depending on paper type
Temperature range for printing 5 to 40°C (41 to 104°F)
Temperature range when not in operation -20 to +55°C (-4 to +131°F)
Maximum altitude when printing 3000 m (9850 ft)
NOTE: If the printer or ink cartridges are moved from a cold location to a warm and humid location,
water from the atmosphere can condensate on the printer parts and cartridges and can result in ink
leaks and printer errors. In this case, HP recommends that you wait at least 3 hours before turning on
the printer or installing the ink cartridges, to allow the condensate to evaporate.
Acoustic specifications
Table E-11 Printer acoustic specifications
Idle sound power ≤ 5.8 B (A)
Operating sound power ≤ 7.0 B (A)
Idle sound pressure ≤ 41 dB (A)
Operating sound pressure ≤ 53 dB (A)
206 Appendix E Printer specifications ENWW
Prin
ter specifications