Insert the maintenance cartridge – HP Designjet Z6200 Photo Printer User Manual
Page 84
See also
Insert the maintenance cartridge on page 76
.
Insert the maintenance cartridge
The plastic bag in which the new maintenance cartridge comes can be used to dispose of the old
maintenance cartridge.
1.
Insert the maintenance cartridge into the slot, in the direction indicated by the arrow.
2.
When the maintenance cartridge has been pushed all the way in, press inwards and downwards
as indicated, until it clicks into place.
If you have difficulty, see
Cannot insert the maintenance cartridge on page 165
NOTE:
The front panel will not show the new maintenance cartridge until the door is closed.
3.
When you have inserted the maintenance cartridge into the printer, close the door.
NOTE:
The printer needs all the ink cartridges, printheads and maintenance cartridge to be
installed before it can continue.
4.
If no paper is loaded, the front panel will instruct you to load some.
NOTE:
Make sure that the printer window and the door to the right are closed after you replace the
supplies. The printer will not print while these are open.
76
Chapter 5 Handle the ink system
ENWW
Handle t
h
e ink system