HP StorageWorks XP Remote Web Console Software - Manual (Page 118)

NOTE:
If paths between the local array and external array are not restored, the external LU cannot be restored
to a usable status, even though you execute the Restore command.
NOTE:
If you set a mainframe-system emulation type (such as 3390-3) when you mapped the external LU,
and you restore the mapped LU without formatting the LU or performing the Write to Control Blocks
operation, data in the volume cannot be read correctly.
1. Select the LU Operation tab. The LU Operation pane appears.
2. In the Device tree, select the external LU group number. Information about the external LU mapped
as an internal LDEV appears in the Device list.
3. In the Device list, right-click the external LU you want to restore, and select LDEV Information. The
LDEV Information window appears. The LDEV list displays information about the external LU
selected in the Device list on the LU Operation pane.
4. Select View all LUs.
5. In the LDEV list, right-click the row of the external LU to be restored, and select Restore.
Figure 57 Shortcut menu of the LDEV Information window
.
The Status column in the selected external LU row changes to Restore.
6. Click OK. The LDEV Information window closes, and the LU Operation pane appears.
Specified contents appear in blue italics in the Device list and appear in the Preset list. To check
setting details, right-click the setting in the Preset list, and select Detail. To cancel settings, right-click
the setting in the Preset list, and select Delete.
7. Click Apply. A confirmation message appears.
Configuring external LUs 118