HP StorageWorks XP Remote Web Console Software - Manual (Page 88)

External LU's extended identifying information. This information is used for identifying logical
volumes in the EVA array. For more information, see
Identifying logical volumes of EVA arrays
(using Characteristic 2) .
• ExG (1-16384)
Group number of the connected external LUs. You can specify any decimal value from 1 to 16384.
The E displayed outside the text box is the capital letter of the external LU group.
• Emulation Type
Emulation type of the mapped external LU (from the XP12000/XP10000/SVS200 perspective)
(see
External LU attributes set by mapping ).
If you clear the Except OPEN-V check box, OPEN-V and available mainframe emulation types
appear in the list.
If you select the Except OPEN-V check box, open-system emulation types other than OPEN-V appear
in the list. To map the external LU as an open-system volume, define the emulation type to use for
the mapped LU as OPEN-V or another type. To map the external LU as an open-system volume
using an emulation type other than OPEN-V, select the Except OPEN-V check box.
If you plan to use the mapped external LU for an XP Flex Copy pair, you must select OPEN-V.
When the external LU to be mapped has the VMA setting, you must select OPEN-V.
• LDEV Capacity
Default capacity of the emulation type selected in the Emulation Type box. When the external LU's
capacity is larger than the capacity displayed in LDEV Capacity, the external LU is divided into
the displayed capacity, and multiple LDEVs are created.
• LDEV
Number of LDEVs created at mapping. By default, the maximum number of LDEVs corresponding
to the capacity supported by the emulation type specified in the Emulation Type box appears.
When the external LU to be mapped has the VMA setting, you can select only 1.
• IO Suppression
Mapped external LU's IO Suppression mode (for OPEN-V emulation only) (see
External LU attributes
set by mapping ).
To suppress I/O operations from hosts (by way of the XP12000/XP10000/SVS200) to the mapped
external LU or use the mapped external LU for a Flex Copy pair, select Enable.
If you do not suppress I/O from hosts to the mapped external LU, select Disable (for example, for
use with XP External Storage).
If you set the emulation type to something other than OPEN-V, IO Suppression mode is automatically
set to Disable.
When the external LU to be mapped has the VMA setting, IO Suppression mode is automatically
set to Disable.
CAUTION:
To use the mapped external LU for the software products other than XP Flex Copy (such as XP
Cache LUN, XP Auto LUN, XP Continuous Access, XP Continuous Access Journal XP Business
Copy, or XP Snapshot), set IO Suppression mode to Disable.
CAUTION:
To set IO Suppression mode to Disable, XP External Storage must be installed.
Configuring external LUs 88