HP StorageWorks XP Remote Web Console Software - Manual (Page 80)

Port Operation tree
Displays ports in the connected local array. Contents displayed in the Port Operation list (right pane)
varies according to the item selected in the Port Operation tree (left pane).
Figure 38 Port Operation tree
.
• Subsystem
When selected, displays nothing in the Port Operation list. Subsystem is selected when you initially
display the Port Operation pane.
• External
When selected, displays ports designated a external ports, which is the port attribute used for XP
External Storage. External ports do not have High Speed mode.
• Initiator
When selected, displays ports designated as an initiator (sending) port (used for XP Continuous
Access, Hitachi TrueCopy for z/OS, XP Continuous Access Journal, Hitachi Universal Replicator
for z/OS, and so on).
• Target
When selected, displays ports designated as host target ports (used for host connect).
• RCU Target
When selected, displays ports designated as an RCU target (receiving) port (used for XP Continuous
Access, Hitachi TrueCopy for z/OS, XP Continuous Access Journal, Hitachi Universal Replicator
for z/OS, and so on).
• Initiator/External
When selected, displays ports for which the Initiator/External MIX mode is set.
• Port number
Displays ports assigned to each port attribute in the branch below each port attribute. XP External
Storage uses ports set to external. One of the following icons appears on the left of each port
number:
Description Icon
Port in Standard mode.
Port in High Speed mode.
XP External Storage panes 80